Cactus WHID
Please check site whid.ninja for more details for Cactus WHID. Here're some Frequently Asked Questions
Initial Flash
- Install Arduino IDE legacy version (e.g. 1.8.19) from arduino.cc
- Download and extract the repo ESPloitV2
- Flash the
esp8266Programmersketch to ATmega32U4- Use Arduino IDE to load the esp8266Programmer sketch from the
flashingfolder. - Select Tools - Board - "LilyPad Arduino USB".
- Select the Port your device is connected to under Tools - Port.
- Upload the sketch.
- Use Arduino IDE to load the esp8266Programmer sketch from the
- Flash WHID firmware to the ESP-12S module
- Download the compiled binary file for ESP-12S module
- Flash the
esp-whid.binwith one of the following tools- Linux: https://github.com/AprilBrother/esptool, Example:
python esptool.py --port=/dev/ttyACM0 --baud 115000 write_flash 0x00000 - Windows: https://github.com/nodemcu/nodemcu-flasher
- Linux: https://github.com/AprilBrother/esptool, Example:
- Flash the
Arduino_32u4_codesketch to ATmega32U4- Use the Arduino IDE to open the
Arduino_32u4_codesketch from thesourcefolder. - Select Tools - Board - "LilyPad Arduino USB".
- Select the Port your device is connected to under Tools - Port.
- Upload the sketch.
- Use the Arduino IDE to open the
Your ESPloit is now ready to configure and or use.